UNICOM Electric Log Splitter 8023af User Manual

PoE Splitter  
Power over Ethernet Splitter  
802.3af  
PN: POE-22001T  
USER’S MANUAL  
 
Overview  
Unicom's new Power over Ethernet (PoE) Splitter Adapter provides  
Ethernet data and DC power to a network device that is not compliant with  
the IEEE802.3af standard (non-PoE). This adapter effectively provides  
Ethernet data and DC power to a non-PoE device with a single cable and  
allows it to operate within a PoE network. PoE is an efficient and  
convenient solution for remote applications where available space is  
limited and/or no power source is readily available. Following is a sample  
PoE Splitter application.  
Features  
Adjustable Output Range: 5v, 7.5v, 9v, and 12v  
IEEE802.3af compliant  
Short circuit protection  
Delivers DC power and data to no-PoE devices  
Plug-and-Play  
Light weight and compact  
Perfect for Wireless AP, Bluetooth AP, IP Cameras, IP Telephones,  
and remote power-feeding applications  
Two different-sized detachable power cables for added flexibility  
 
Package Contents  
(1) Power over Ethernet Splitter  
(2) DC Power Cables – 5.5x2.0mm and 5.5x2.5mm  
User's Manual  
PoE Splitter  
With adjustable output  
DC Power Cables  
User's Manual  
Figure 1-1. Package Contents  
Compare the contents of your Power over Ethernet Splitter package with  
the standard checklist above. If any item is missing or damaged, please  
contact your local dealer for service.  
 
Hardware Description  
Unicom's Power over Ethernet Splitter Adapter has three connection ports,  
one LED indicator, and a voltage adjustment DIPswitch.  
Data In port: This is an RJ-45 Ethernet interface port for data  
transmission into the PoE Splitter. This port connects with a PoE  
injector.  
The Data In port  
Data Out port: This is an RJ-45 Ethernet port and has a detachable  
RJ-45 cable for connecting with a PoE device such as a camera.  
Power Out port: The adapter supports and includes two types of  
power cables – 5.5 x2.0mm and 5.5x2.5mm. The Power Out port  
transmits DC power to a 5V, 7.5V, 9V or 12V device.  
Data Out and Power Out ports  
LED indicator: The splitter features one system Power LED indicator.  
It is located on the top of the Power over Ethernet Splitter.  
 
System Power LED indicator  
DIPswitch: The DIPswitch changes the splitter voltage allowing for it  
to operate with a variety of products. It provides four voltage values –  
5V, 7.5V, 9V and 12V. The default is 5V. Before adjusting the  
DIPswitch, disconnect the power from Splitter Adapter.  
DIPswitch  
 
Installation  
To install the Power over Ethernet Splitter, please follow the steps below.  
1. Use an RJ-45 cable to connect the Data In port on the Power over  
Ethernet Splitter Adapter with the Data Out port of a PoE Hub. If the  
hub does not support PoE function, you'll need to install a PoE Injector  
(pn: POE-32001T) between the hub and splitter.  
2. Use an RJ-45 cable to connect the Data Out port on the PoE Splitter  
Adapter to a remote device (Such as a router, access point, camera,  
etc.).  
3. Choose the proper power cable (either 2.0mm or 2.5mm) and plug the  
straight end into the Power Out port on the Splitter.  
4. Plug the right-angle end of the power cable into the device’s power  
port.  
5. Adjust the Voltage on the Splitter to match the remote device. It  
supports four voltage values – 5V, 7.5V, 9V and 12V. The default  
value is 5V. Before adjusting the DIPswitch, please disconnect the  
power from the Splitter Adapter.  
6. Before powering on the system, ensure all connections and the voltage  
is set correctly.  
The PoE Splitter connects to the Switch or POE Injector in the  
Data In port.  
The PoE Splitter connects to the remote device through two  
connection ports – Data Out and Power Out.  
The voltage is set correctly: 5V, 7.5V, 9V and 12V.  
 
Technical Specification  
IEEE802.3 10BASE-T  
Standard  
IEEE802.3u 100BASE-TX  
IEEE802.3af Power over Ethernet  
(2) Power Cables,  
each with straight and a right angle plugs  
Plug dimension: 5.5 x 2.0mm, 5.5 x 2.5mm  
Power jack  
diameter  
DIPswitch  
Connector  
Four-segment output voltage switch  
Data / Power In: 1 x RJ-45.Data pin 1,2,3,6  
Power pin:  
4,5(V+), 7,8(V-) and 1,2(V+), 3,6(V-)  
Data Out: 1 x RJ-45, Data pin 1,2,3,6  
Power out jack: 5V, 7.5V, 9V, 12V (Adjustable)  
Maximum feeding current: 2.0A@5V  
10Base-T: 2-pair UTP/STP,  
Cat.3, 4,5 cable, EIA/TIA-568 100-ohm (100m)  
Network Cable  
100Base-TX: 2-pair UTP/STP,  
Cat.5e cable, EIA/TIA-568 100-ohm (100m)  
LED  
System: power (green)  
Power Input  
DC 48V  
Operating  
environment  
0˚~ 40˚, 90% Humidity (non-condensing)  
80mm x 55mm x 26mm (L x W x H)  
Dimension  
EMI & Safety  
FCC Class B, CE, CE/EN60950  
 
908 Canada Court  
City of Industry, CA 91748 U.S.A.  
Phone: 626.964.7873 or 800.346.6668 Fax: 626.964.7880  
UNIDOC020905  
 

Thermo Products Furnace OD6FA072D48B User Manual
Toshiba Cash Register ST A20 SERIES User Manual
Toshiba CRT Television 26HF84 User Manual
Toshiba Network Card FS 3700 Series User Manual
Toshiba Network Card OIS40R User Manual
Tricity Bendix Ventilation Hood CH 550 User Manual
Victor CRT Television LYT1037 001A User Manual
Viking Range F20512 User Manual
Walgreens Blood Pressure Monitor BD 1234W User Manual
Weber Gas Grill 56070 User Manual